Destiny Japan RX-10FF 1/10 Scale Front Wheel Drive Competition Touring Car Kit

  • Sale
  • $499.00
  • Regular price $599.00
Tax included.


Destiny Japan RX-10FF 1/10 Scale Front Wheel Drive Competition Touring Car Kit

 

DUE MID SEPTEMBER

 

Destiny is now fully engaged in the fronti scene with the RX-10FF! The new vehicle is now available and extensively tested during development. The RX-10FF will certainly celebrate many successes. The quality is excellent - as always with Destiny!

 

Here are the most important details about the RX-10FF:

  • Gearbox with 37 to 20 teeth (internal ratio 1.85) - perfect for Stock Racing in the Fronti class.
  • Cone differential is quick to remove for easy maintenance.
  • Newly designed upper bulkheads for the finest roll center settings.
  • New top deck with many flex options.
  • Double-jointed cardan made of high quality spring steel for maximum curve speed.
  • Ball-bearing, very robust steel "slide steering system". Very proportional and gentle steering feel, Ackermann can be easily and quickly adjusted!
  • New track blocks made of 7075 aluminum. There are 3 different width track blocks, with which you can then achieve a width of 40.7-49.5mm on the plastic inserts.
  • New plastic inserts for adjusting the toe or after mark in 0.3 degree increments.
  • New lower bulkheads made of 7075 aluminum.
  • New motor mount made of 7075 aluminum with many flex options.
  • New, one-piece servo and steering mount made of 7075 aluminum for improved flex and better steering.
  • New 3.0mm strong damper bridges made of high quality USA carbon fiber.
  • Chassis made of 2.25mm, and Topdeck made of 2.0mm thick and very high quality USA carbon fiber.
  • Caster on the front axle is adjustable via inserts to 2, 4 or 6 degrees. The C-Hub has a large opening for easy removal of the double-articulated gimbals.
  • Newly developed aluminum wheel hub - extremely light and reliable.
  • Very hard "composite" plastic swingarms, wheel carriers, steering levers and C-hubs from Xenon Racing.
  • Damper balls made of low-friction "low friction coating" aluminum for perfect smoothness.
  • Very precise cone differential with outdrives in 7075 aluminum.
  • Black anodized track and handlebars made of 7075 aluminum.
  • Short dampers with hard aluminum body, POM piston plates and 20mm springs.
  • Ball-bearing stabilizers front and rear.
  • Main gear enclosed (64P with 96 teeth from Xenon Racing).
  • Fully ball bearing (total 17 ball bearings).

 


 

English:

Destiny is now in contention in the "FWD Class" as well as the RX-10FF front wheel drive car. During testing the car performs in the near future for sure!

 

Destiny RX-10FF Features:

  • Transmission 37T / 20T in ratio 1.85 to compatible for stock class FF race.
  • Easy remove gear differential for maintenance.
  • New design front and rear upper linkage mount. Fine adjustment on roll center.
  • New design upper deck with multi chassis flex adjustment function. Change the flex point by screw mounting on difference position.
  • Spring Steel double joint drive shaft. Maximum increase steering efficient and cornering speed.
  • Bearing steering rack system design. More proportional and smooth steering feel. Quick and easy ackerman adjustment. Steel steering rack as more reliable.
  • New design 7075 aluminum front and rear suspension mounts. Three different sizes of suspension mounts to make the difference on track width from 40.7-49.5mm.
  • New design plastic eccentric bushing for suspension. Fine adjustment on toe-in and toe-out angle in 0.3 degree per step.
  • New design front and rear lower 7075 aluminum bulkheads.
  • New design 7075 aluminum engine mount and layshaft bulkhead.
  • New design single piece 7075 aluminum servo mount and steering mount. It makes change on the chassis.
  • New design front and rear shock towers. Made by USA high grade graphite materials.
  • 2.25mm USA high grade graphite materials main chassis, 2.0mm for upper deck and 3.0mm front and rear shock towers.
  • 2/4/6 deg caster insert is selectable to assembly to c-hub. Large open on c-hub for easy install or remove front cvd.
  • All new design aluminum wheel adapters. Lightweight and reliable on drivetrain.
  • High grade composite front and rear lower suspension arms, steering knuckles, c-hubs and rear hubs plastic parts from Xenon Racing.
  • Full set low friction coating aluminum damper balls and ball studs.
  • High precision 4 gears differential with 7075 aluminum weight reduced gear drive cups.
  • 7075 aluminum steering and upper linkage turnbuckles. Black color anodized.
  • High quality hard coated short dampers with POM pistons and 20mm damper springs.
  • Bearing supporting front and rear anti-roll bar system.
  • 64P 96T Spur Gear from Xenon Racing.
  • 17 pcs high grade ball bearings.