FACTORY SELL OUT
$250 OFF RRP
NOW AT $399
l New design 7075 aluminum front and rear suspension mounts. Three different size of suspension mounts to makes wider range adjustment on track width from 40.7-49.5mm.
l New design plastic eccentric bushing for suspension. Fine adjustment on toe-in and toe-out angle in 0.3 degree per step.
l New design front and rear lower 7075 aluminum bulkheads. 1mm down on transmission.
l New design 7075 aluminum motor mount. Motor position forward/backward changeable. It makes difference setup of weight transfer on corner response.
l New design single piece 7075 aluminum servo mount and steering mount. It makes change on chassis flex to improve the steering.
l New design transmission ratio changeable to compatible with difference race classes, track size or condition. 37T/20T in ratio 1.85, 38T/20T in ratio 1.9 and 40T/20T in ratio 2.0.
l New design front and rear shock towers. Made by USA high grade graphite materials.
<Destiny RX-10SR Features>
l 2.25mm USA high grade graphite materials for narrow design main chassis, 2.0mm for upper deck and 3.0mm front and rear shock towers.
l 2/4/6 deg caster insert is selectable to assembly to c-hub. Large open on c-hub for easy install or remove front cvd.
l All new design on steering knuckle. Re-position ball bearings and CVD joint CENTER. Maximum decrease the noise and wheel vibration. Maximum increase steering efficient and cornering speed.
l All new design aluminum wheel adaptors. Lightweight and reliable on drivetrain.
l High grade composite front and rear lower suspension arms, steering knuckles, c-hubs and rear hubs plastic parts from Xenon Racing
l Bearing steering rack system design. More proportional and smooth steering feel. Quick and easy ackerman adjustment.
l Full set low friction coating aluminum damper balls and ball studs.
l 7075 aluminum rear cvd dogbone.
l High precision 4 gears differential with 7075 aluminum weight reduced gear drive cups.
l High quality and lightweight plastic front spool set.
l 7075 aluminum steering and upper link turnbuckles. Black color anodized.
l High quality hard coated short dampers with POM pistons and 20mm damper springs.
l One piece motor mount design with special function of multi chassis flex adjustment by mounting screw position.
l Bearing supporting front and rear anti-roll bar system.
l 64P 114T spur gear from Xenon Racing
l 17 pcs high grade ball bearings.