Set comprising the MR33 Signature 1:10 on-road car stand (MR33-252011) and the fantastic NeoPit adapter (MR33-252012). This allows you to install your SkyRC NEO tyre warmers (600157-01) perfectly and optimise them for immediate use on the racetrack.
Set contents:
1 x MR33-252011 car stand
1 x MR33-252012 NeoPit adapter
NeoPit product description
Get your pit setup ready for any season! With our new MR33 NeoPit, you can connect your MR33 car stand (MR33-252011) to the SkyRC Neo tyre warmers (600157-01) in a flash – unbeatable in summer. And in winter? Simply disconnect it and use your car stand as usual (without the heating station). With the MR33 NeoPit, you can use your existing 2S LiPo batteries up to 25 mm in height directly for the tyre warmers – no extra batteries needed. At your workbench, you can power the unit via the mains, and when it’s time to head to the track, simply plug in the LiPo, take the unit with you and keep the tyres warm right until the end!
IMPORTANT: The tyre heating station is NOT included in the scope of delivery.
ASSEMBLY
- Remove the four M2 screws (on the sides) from the heating station’s housing.
- Screw the heating station onto the NeoPit using the four long M2 screws provided. The Allen key can be inserted through the openings in the NeoPit (with the screw).
- Carefully insert the MR33 Car Stand into the openings from above and secure it from below using the four M3 screws.
- If desired, insert a 2S battery (maximum height 25mm) and secure it with the two grub screws (visible when viewed from the front, to the left and right of the heating station) (do not overtighten).
- First, plug a cable with an XT60 connector into the battery and then connect it to the heating station!
