SSL-COMPATIBLE PROGRAMMABLE SERVO
# Compatible with CODE 10 (M12S, EXZES ZZ, MT-44)
Not Compatible with CODE 5 (M12, EXZES Z, MT-4S, MT-4, MT-S)
MULTI SETTING GEAR-COMPATIBLE
SUPER RESPONSE (SSR) MODE-COMPATIBLE
HIGH RESPONSE (SHR) MODE-COMPATIBLE
Li-Po 2 CELL-COMPATIBLE
LOW PROFILED
HIGH SPEED TYPE
CORE-LESS MOTOR
METAL GEARS
AL HEAT SINK
Speed
0.08 sec/60° (7.4V)
0.10 sec/60° (6.0V)
Torque
16.6 kg?cm (7.4V)
14.7 kg?cm (6.0V)
Dimensions
40.5 x 20.5 x 26.5 mm
Weight
49.6 g
Programmable Servo to be compatible with SSL & Telemetry
Setting Adjustment by wireless from Radio
Setting Adjustment to connect Servo with Multi Setting Gear
Regarding Temperature, Current, Voltage and Volume Position on Servo inside,
Telemetry-transmission can be passed to Radio.
# Initial Setting on Multi Setting Gear is necessary.
Setting Items
*SSL-CH (SSL Channel Setting) *STRETC (Stretcher Adjustment) *BOOST (BOOST Adjustment)
*D-Band (Dead Band Adjustment) *MV-MID (Middle Torque Adjustment)
*MV-END (Later Torque Adjustment) *BREAK (Break Adjustment)
**MV-HOLD (Power Adjustment at whole area) **MV-FRQ (Feeling Adjustment at whole area)
**MAX-PW (MAX Duty Adjustment)
Multi Setting Gear is necessary for **setting.
PGS SETTING GEAR
Possible to adjust firmware update of PGS
Possible to save and read setting value of PGS by micro SDHC-card
# micro SDHC-Card 107A90581A (sell separately)
PGS Setting Items
SSL-CH (SSL Channel Setting)
STRETC (Stretcher Adjustment)
BOOST (BOOST Adjustment)
D-Band (Dead Band Adjustment)
MV-MID (Middle Torque Adjustment)
MV-END (Later Torque Adjustment)
BREAK (Break Adjustment)
MV-HOLD (Power Adjustment at whole area)
MV-FRQ (Feeling Adjustment at whole area)
MAX-PW (MAX Duty Adjustment)
TELEMETRY ASSIGN
CODE 10 ASSIGN
FACTORY SET
SD CARD SAVING & READING
FIRMWARE UPDATE
