Discount applied at checkoutšŸ”„

Destiny Japan RX-10SR 3.0 1/10 Scale Competition Touring Car Kit (Aluminum Flex Chassis Edition DRX-00011)

Tax included. Shipping calculated at checkout.


SKU: DRX-00011

This item is available for BACKORDER.

The Destiny RX-10SR 3.0 touring car is following the trend of removing the shock towers, the shock absorbers are now mounted to the bulkheads. The front and rear upper arms are made from a moulded composite material which is length adjustable, while the lower arms are carbon fibre plates, with all arms using pivot ball mounting which ensures free movement and extra adjustability. A new single piece design motor mount with multi-Flex chassis adjustment features adjustable front and rear belt tensioners and battery backstops. The new lower bulkheads install with upper bulkheads with centering pin for a more reliable mounting. All this plus a whole lot of other changes.


  • Interchangeable lower arm for front, rear, left and right.
  • Smooth movement suspension by hard coated 5mm lower arm pivot balls and high quality bushing.
  • Graphite lower arm length (track width) adjustable by difference orientation of steering block pivot ball holder, four length was selectable by two different holders.
  • Front and rear aluminium lower shock mount.
  • Front and rear steering block made by high grade 7075 aluminium and interchangeable.
  • Front and rear steering plate swap for two difference steering response setup.
  • Large size 6x11x4mm ball bearing used in inner of steering block for more reliable and efficiency.
  • Spring steel front double joint drive shaft, and 7075 aluminium rear swing shaft.
  • Interchangeable front and rear upper aluminium bulkheads. Front caster 4/5 deg, rear caster 0/1 deg adjustable by different orientation of bulkheads.
  • Mounted the pivot balls by screws through a groove and a thread on bulkhead. Upper arm free movement adjustable for active caster setting simply.
  • New lower bulkheads install with upper bulkheads with centering insert and make more reliable.
  • Laser engraved marking on bulkhead for easy identify differential position.
  • Lower position of front and rear anti-roll bar mounting.
  • New single piece design motor mount with Multi-Flex Chassis adjustment. Featured adjustable front and rear belt tensioners and battery backstops.
  • Shock tower composed by two pieces, easy installation and tweak free alignment.
  • Precise shock angle adjustment by shim.
  • Shock tower mounted to chassis for more stability and improved the traction.
  • 7075 aluminium lightweight hardened wheel hub.
  • 7075 aluminium steering centre plate and steering arms with ball bearings.
  • 7075 aluminium lightweight floating servo mount.
  • Power HD S15X servo is able to mounted directly.
  • Swap the graphite battery holders to change the battery forward/backward position.
  • Quick release battery backstop and height adjustable to compatible difference size battery
  • Battery placement fully fine adjustable.

Instruction Manual Download

Facebook Group