XeRun XR10 STOCK SPEC G2
Built in reverse voltage protection
Something that any electronic speed control facesis the possibility of being connected backwards. The new XR10 Stock Spec G2 features HOBBYWING's proven polarity protection protection.
Higher power, lower temperature
The new Stock Spec G2 has increased maximumcurrent rating of 100 amps. This is 20 amps more than the previous Stock Spec. Testing has shown as much as 30°C lower temps under the same loads. The stability and reliability of the ESC has been further strengthened.
Built-in BEC supporting high-voltage servos
The BEC's continuous output current has been upgraded from3A to 5A. The maximum current is upgraded from6A to 10A. the output voltage is now adjustable from 6V/7.4V. Hobbyist will be able to use high-voltage and powerful servos available on the market with greater control.
Optimized cable outlet for convenient wiring
The ESC input and output wires has been optimized to ensure ease of different wiringneeded for both on-road and off-road vehicles.
Low center of gravity, easy to balance
The center of gravity of the ESC has been lowered by 14.3% to further enhance the balance adjustment of the chassis.
Real-time data acquisition, easy analysis
After the ESC is connected to the OTA Bluetooth module, connect to the ESC through the HW Link mobile app and turn on the real-time data recording function. Throttle, voltage, current, temperature, motor RPM, and more, can be viewed in real time.In addition, OTA can record the above data using HW Link. Easy to implement data analysis functions.
Note: Due to the Bluetooth transmission distance, the effective distance is about 5m!
Multi-level throttle and brake curvature, freely adjustable
It supports a wide range (-10~10) of throttle and brake curvature adjustment. From an aggressive to mild throttle can be set, and fined tuned with the throttle curve. Similarly, the brake curve can be adjusted to meet the needs of the track.
Drag brake frequency is independently adjustable
The drag brake frequency can now be setindependent from the standard brake frequency. The user will be able to adjust the drag brake and brake functions accurately.
RPM limit function
Supports 79 Settings (10000-88000RPM) RPM limit value selection. It can be programmed through the LCD programming box or OTA module. It is simple and convenient to meet the speed limit requirements of various competitions in the world.
Dual firmware, multiple applications
The ESC comes equipped with built-in Blinky Stock firmware. It is suitable for Blinky Stock competition. The Boost firmware can be flashed for non-Blinky competition or drift applications.
Product Name |
|
||||||||||||
Product Number |
|
||||||||||||
Type |
|
||||||||||||
Specifications |
|
||||||||||||
Wires & Connectors |
|
||||||||||||
Fan |
|
||||||||||||
ESC Programing via |
|
||||||||||||
Data Recording |
|
||||||||||||
Firmware |
|
||||||||||||
Size & Weight |
|
||||||||||||
Applications |
|